Products

An effective ready-to-use cleaner designed to remove dirt, soil, soap scum and hard water deposits from grout joints. Prepares non-epoxy grout joints by lightly etching the surface for a superior Aqua Mix® Grout Colorant bond.

A concentrated translucent stain designed to change the color and enhance the natural texture of porous adobe clay tile. Aqua Stain for Saltillo is available in four designer colors: Adobe Red, Piso Blanco, Spanish Oak and Terra Cotta. May also be used as a pre-grout coating to protect porous adobe tile from grout staining when […]

Polyblend Plus has all of the great features of original Polyblend, plus some new value-added enhancements to improve performance, finished color, and color consistency. It is an ANSI A118.6 polymer-modified, cement-based non-sanded grout designed for highly glazed or polished tile, marble and natural stone that would be scratched by sanded grouts. This durable, non-shrinking grout […]

Hybrid polymer, moisture cure wood-plank adhesive that does the job of four products in one bucket. It’s an adhesive, concrete moisture barrier, sound reduction and crack isolation membrane all in one. The product is easy to trowel, has excellent ridge retention and superior green grab. This low VOC product is FloorScore certified.

TechPrime A is an advanced acrylic primer and sealer that prepares surfaces for the application of an appropriate CustomTech™ self-leveling underlayment. It seals porous and non-porous surfaces and improves the bond of the underlayment to the subsurface.

A fast-curing, premium patching and finishing compound that provides a smooth finish to a variety of substrates prior to the installation of floor coverings. Formulated with Controlled Cure Technology,™ Silk helps eliminate installation problems of bond failure, crumbling, mildew and staining of resilient flooring due to free- moisture found in traditional underlayment. Its rapid setting […]

CustomTech® TechMVC™ 100% Solids Epoxy Moisture Vapor Control is a true single coat, moisture and alkali- resistant, two-component, rapid cure 100% solids epoxy coating specifically formulated to control concrete moisture vapor emission and alkalinity beneath finished flooring. TechMVC™ may be used on concrete substrates measuring up to 100% RH. The single-coat application effectively controls concrete […]

TechLevel-HPT is a High Performance, Self-Leveling Topping designed for fast-track resurfacing and smoothing of interior substrates such as concrete, porous tile and certain non- porous surfaces when properly prepared. TechLevel-HPT can be sealed to create a concrete wear surface for commercial, light industrial and residential applications. TechLevelHPT can be installed from 1/4” to 1”. TechLevel-HPT […]

TechLevel-WSF SLU is a high flow, fiber reinforced calcium aluminate cement based, self-leveling underlayment that eliminates the need for reinforcing lath over plywood and OSB on interior wood framed subfloors. It produces a smooth, level substrate ready for the installation of most floor coverings. Formulated using Controlled Cure Technology™, TechLevel-WSF SLU helps eliminate installation problems […]

TechLevel™ XP­1® is a high performance, calcium aluminate-based, high strength, low prep, self-leveling underlayment that levels floors prior to the installation of most floor coverings. This quick-setting underlayment can be applied to 2″ (5 cm) thick in one pour and seeks its own level in minutes. Formulated to have high compressive strength and abrasion resistance, […]