Surface Preparation

An alkali-resistant fiberglass fabric used to reinforce RedGard®, Custom® 9240, FractureFree®, CBP-232, and RedGard® SpeedCoat® when used over cracks in underlayment. It can also be used in corners and wherever there is a change of plane in the installation for additional reinforcement.

QUIKRETE® Floor Mud is designed for flattening and leveling surfaces for travertine, slate, marble, ceramic, and glass floor tile and for shower pan applications. QUIKRETE® Floor Mud consists of a uniformly blended mixture of cement, graded sand, and other proprietary ingredients and requires only the addition of water.

CBP-232 is a ready-to-use, rapid drying, liquid applied elastomeric, waterproofing, and crack prevention membrane that does not require fabric in the field, coves, or corners. It can be used for interior or exterior commercial, industrial, or residential tile and natural stone floor & wall installations. Easily applied with roller, trowel or sprayer producing a continuous […]

Pre-blended, 3:1 mix ratio underlayment specifically designed to float a mortar bed for ceramic and natural stone tile. Eliminates need for site mixing of sand and cement.

The #1 trusted and reliable liquid-applied waterproofing membrane for your go-to commercial and residential tile and stone applications. It creates a waterproof membrane barrier and reduces crack transmission for use on both interior and exterior substrates. It bonds directly to clean metal drains, PVC, stainless steel, and ABS drain assemblies. It can be used as […]

Custom® 9240 is designed for waterproofing tile and stone installations that securely bonds to a variety of substrates. It is a flexible, seamless waterproofing membrane system with a liquid-applied polymer and reinforcing fabric.

A ready-to-use, elastomeric, crack prevention membrane developed for protecting tile floors from non-structural cracks due to minor surface movement. Suitable for all interior or exterior commercial and residential tile and stone installations. Meets A118.12 for crack isolation membranes.

An alkali-resistant fiberglass tape used to reinforce RedGard® and RedGard® SpeedCoat® when used over cracks in underlayment. It can also be used in corners and wherever there is a change of plane in the installation for additional reinforcement.

Peel & Stick Primer is used for the application of peel and stick mat underlayments like Crack Buster® Pro and EasyMat®.

A versatile, light, and easy to use and cut underlayment for setting tile and stone over any acceptable floor. The mat is designed so that the mortar locks in – creating a bonded crack-prevention system for subfloor movement up to 1/4″ (6 mm). Its SoundGard® Technology offers high and credible impact sound reduction.