Products

Categories

All Products

Aqua Mix® Aqua Stain

A concentrated translucent stain designed to change the color and enhance the natural texture of porous adobe clay tile. Aqua Stain for Saltillo is available in four designer colors: Adobe Red, Piso Blanco, Spanish Oak and Terra Cotta. May also be used as a pre-grout coating to protect porous adobe tile from grout staining when […]

Read More


Polyblend®Plus Non-Sanded Grout

Polyblend Plus has all of the great features of original Polyblend, plus some new value-added enhancements to improve performance, finished color, and color consistency. It is an ANSI A118.6 polymer-modified, cement-based non-sanded grout designed for highly glazed or polished tile, marble and natural stone that would be scratched by sanded grouts. This durable, non-shrinking grout […]

Read More


Wood HP4 4-In-1 Hybrid Polymer Adhesive

Hybrid polymer, moisture cure wood-plank adhesive that does the job of four products in one bucket. It’s an adhesive, concrete moisture barrier, sound reduction and crack isolation membrane all in one. The product is easy to trowel, has excellent ridge retention and superior green grab. This low VOC product is FloorScore certified.

Read More


TechPatch RP Ramping Patch

TechPatch RP is a premium quality calcium aluminate, fast setting underlayment product with exceptional handling characteristics, used for ramping, patching or screeding suitable horizontal substrates. TechPatch RP can be installed from featheredge to 1.5″ neat under most commercial and residential floor coverings.

Read More


Tech Patch-MP Multipurpose Rapid Setting Skim Coat & Floor Patch

Tech Patch MP is a fast setting, calcium aluminate compound that provides a smooth finish on interior subfloors prior to the installation of a wide variety of floor coverings. Mix with water only to patch, level or skim coat concrete, OSB and plywood up to 1/2″ (12 mm) thick per application. Install floor coverings in […]

Read More


TechLevel-HPT High Performance Topping

TechLevel-HPT is a High Performance, Self-Leveling Topping designed for fast-track resurfacing and smoothing of interior substrates such as concrete, porous tile and certain non- porous surfaces when properly prepared. TechLevel-HPT can be sealed to create a concrete wear surface for commercial, light industrial and residential applications. TechLevelHPT can be installed from 1/4” to 1”. TechLevel-HPT […]

Read More


Silk® Patching & Finishing Compound

A fast-curing, calcium aluminate based, patching and finishing compound that provides a smooth finish to a variety of substrates prior to the installation of floor coverings. Formulated with Controlled Cure Technology,™ Silk helps eliminate installation problems of bond failure, crumbling, mildew and staining of resilient flooring due to free-moisture found in traditional underlayments. Its rapid […]

Read More


CustomTech® TechMVC™ Moisture Vapor and Alkalinity Barrier

CustomTech® TechMVC™ 100% Solids Epoxy Moisture Vapor Control is a true single coat, moisture and alkali- resistant, two-component, rapid cure 100% solids epoxy coating specifically formulated to control concrete moisture vapor emission and alkalinity beneath finished flooring. TechMVC™ may be used on concrete substrates measuring up to 100% RH. The single-coat application effectively controls concrete […]

Read More


CustomTech™ TechLevel™ 100 Self-Leveling Underlayment

TechLevel™ 100 is a high quality self-­leveling underlayment that achieves greater than 4000 psi compressive strength. TechLevel 100 levels floors prior to the installation of tile, resilient flooring, carpet, wood and other floor coverings. This underlayment can be applied up to 1.5″ (3.8 cm) thick in one pour and seeks its own level in minutes.

Read More


CustomTech™ TechLevel™ 125 Deep Pour Self-Leveling Underlayment

TechLevel™ 125 is a high quality, self-leveling underlayment that achieves up to 4,000 psi compressive strength. TechLevel™ 125 levels floors prior to the installation of resilient flooring, carpet, wood, ceramic tile, natural stone tile and other floor coverings. This quick setting underlayment can be applied 1/4″ to 3″ (7.6cm) thick in one pour and seeks […]

Read More