CustomTech Flooring Prep

TechPatch RP is a premium quality calcium aluminate, fast setting underlayment product with exceptional handling characteristics, used for ramping, patching or screeding suitable horizontal substrates. TechPatch RP can be installed from featheredge to 1.5″ neat under most commercial and residential floor coverings.

TechPatch MP is a fast-setting, calcium aluminate compound that provides a smooth finish on interior subfloors prior to the installation of a wide variety of floor coverings. Mix with water only to patch, level, or skim coat concrete up to 1/2 in (12 mm) thick per application. Install floor coverings in as little as 30 […]

CUSTOMTECH TechPatch – TW is a rapid-curing, calcium aluminate cement based compound used to fill and finish exterior and interior concrete and masonry vertical surfaces. Use to hide large and small chips, holes and irregularities on tilt-up concrete; casted concrete and other masonry surfaces before painting or sealing.

TechPrime A is an advanced acrylic primer and sealer that prepares surfaces for the application of an appropriate CustomTech™ self-leveling underlayment. It seals porous and non-porous surfaces and improves the bond of the underlayment to the subsurface.

TechPrime E is a low-viscosity, two-component, 100%-solids epoxy primer for surface preparation before installing an appropriate CustomTech™ underlayment. TechPrime E can be used over concrete and nonporous substrates for underlayment installation, as it penetrates the surface and makes for easy installation. TechPrime E seals and improves that bond of the leveling system. For professional use […]

TechLevel™ 100 is a high quality self-­leveling underlayment that achieves greater than 4000 psi compressive strength. TechLevel 100 levels floors prior to the installation of tile, resilient flooring, carpet, wood and other floor coverings. This underlayment can be applied up to 1.5″ (3.8 cm) thick in one pour and seeks its own level in minutes.