ProLite® RS Premium Rapid Setting Large Format Tile Mortar

Product ID: TDS-121

Rapid setting version of ProLite. Grout in unders 3 hours with light traffic in 4 hours.
This exceptional handling mortar is iIdeal for setting large and heavy tile on interior or exterior floors and walls. A 30lb. bag has the same coverage as a 50 lb. bag. Non-sag, non-slump formulation capable of medium bed applications up to 3/4″.

  • Fast curing – Grout in 3 hours, open for traffic in 4 hours
  • Non-slump for floors, sag and slip resistant for walls
  • Lightweight – 30 lbs. covers the same area as 50 lbs. of traditional mortar
  • Exceeds ANSI A118.15FHT, A118.11

Coverage Chart

SQUARE FOOT COVERAGE PER 30 LB BAG (SQUARE METER PER 13.6 KG)

Trowel Size Min Coverage Max Coverage
1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) Square-Notch 90 sq. ft. (8.4 M²) 100 sq. ft. (9.3 M²)
1/4" x 3/8" x 1/4" (6 x 9.5 x 6 mm) Square-Notch 63 sq. ft. (5.9 M²) 70 sq. ft. (6.5 M²)
1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) Square-Notch IMPORTANT NOTE BELOW IMPORTANT NOTE BELOW
3/4" × 9/16" × 3/8" (19 × 14 × 9.5 mm) U-Notch 36 sq. ft. (3.3 M²) 40 sq. ft. (3.7 M²)

*IMPORTANT NOTE: Custom Building Products does not recommend the use of a 1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) Square-Notched trowel as the ½” spacing between each square notch has been shown to make it more difficult to bed tiles and achieve proper mortar coverage. CUSTOM recommends the use of a trowel design that promotes mortar ridge collapse such as either a deeper, slanted, U-notch, V-notch, or ridged large format trowel when applying thicker amounts of mortar to accommodate tile warpage and back pattern recesses. Applying mortar using a 3/4" × 9/16" × 3/8" (19 × 14 × 9.5 mm) U- Notch at a 300 angle provides better coverage with the same coverage as the ½” notched trowel.

Mortar coverage between the substrate and tile underside is required to be ≥80% for dry areas and ≥95% for wet areas and exteriors with all tile edges properly supported with mortar and in a minimum of 3/32” (2.38 mm) and a maximum of ¾” (19mm) continuous thickness. Note: Larger tiles, tiles with deep underside patterns and ungauged natural stone tiles may require larger notch sizes and may need to be flat back-troweled (formerly back buttered) to achieve proper coverage and mortar support. CUSTOM recommends testing to confirm adequate bonding mortar coverage. CUSTOM recommends testing to confirm adequate bonding mortar coverage.

When back troweling, consider the tile’s underside pattern and depth to estimate thickness and usage to add to your estimate. For achieving proper mortar coverage see the following video: Trowel & Error. (Also available in Spanish and Russian.) For information regarding flat back troweling, refer to The National Tile Contractors Association / Reference Manual Flat & Notch Back-Troweling.

Chart for estimating purposes. Coverage may vary based on installation practices and jobsite conditions. For more sizes, use the material calculator at CustomBuildingProducts.com or contact CUSTOM Technical Services at 800-282-8786.

 

Related Product(s)

Materials Calculator Determine how much material you need for your project.