Products : Care & Maintenance : Sealers : StoneSpecific® Polished Marble, Travertine & Limestone Sealer

StoneSpecific® Polished Marble, Travertine & Limestone Sealer

Available in Canada only.

Optimum protection on medium-density polished stone - marble, travertine and limestone. Designed to penetrate and seal the polished stone surfaces to provide optimal protection, keeping your natural stone clean, vibrant and new.

A premium water-based formula that is non-combustible. Low odor, pH neutral it can be used indoors or out, in commercial or residential applications. Allows moisture vapor transmission. Protects sanded or non-sanded grouts.

StoneSpecific® Low VOC (Volatile Organic Compound) formulas help provide better indoor and outdoor air quality compared to similar traditional products. Complies with EPA and CARB VOC Requirements.

  WHERE TO BUY Not all products are sold at all stores. Please call the distributor to ensure product availability.
Have a question?



When optimum protection is required for polished natural stone. Protects fabricated or tiled stone surfaces covering kitchens, baths, walls or floor surfaces.


Suitable Tile Types

Provides optimum protection for all types of polished stone such as marble, travertine and limestone. Specifically formulated to protect polished, medium density porous natural stone.

General Surface Prep

Surface should be dry, clean and free of waxes, sealers  or finishes. TileLab® Heavy-Duty Cleaner & Stripper will clean the surface or strip wax and acrylic finishes. New installations: Allow grout to cure 48 hours before applying sealer. 

Health Precautions

CAUTION: MAY IRRITATE EYES. MAY IRRITATE SKIN. MAY CAUSE RESPIRATORY IRRITATION. Do not mix with other chemical products. Do not get on skin or clothing. Do not get in eyes. Do not breathe fumes. Do not swallow. KEEP OUT OF REACH OF CHILDREN. Use onlye in a well-ventilated area. Wear chemical resistant gloves, CSA approved respirator, and eye protection. FIRST AID TREATMENT: Contains: Fluoropolymer, quarternary amine compound and d-Limonene. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If breathed in, move person into fresh air. In emergency, call (800) 535-5053.

Pre-Grout Sealer/Grout Release

Porous tile, such as clay and Saltillo pavers, can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier. Apply two coats of sealer according to directions after tile has been bonded for a minimum of 24 hours, or apply to front face of tile before installation.

Application of Product

WEAR IMPERVIOUS GLOVES, such as nitrile, and eye protection when handling product.

Test product in obscure area to ensure desirable results.  Apply liberally using a new mop, lambswool applicator or sponge. Maintain a thin, even coat to cover surface, working-in sealer for 5 – 10 minutes. Surface must stay wet letting sealer soak for additional 10 minutes, allowing for maximum penetration. Immediately after, wipe off any sealer completely before it dries. If initial coat has been absorbed, apply additional coat 15 minutes after first application.

Drying Time

Drying time 2 – 3 hours. Do not clean for 24 hours.

Cleaning of equipment

Clean tools and hands with soap and water immediately after use.

Product Maintenance

Do not use cleaners containing ammonia, acids or bleach. Use an appropriate TileLab® or Aqua Mix® neutral cleaner. Tile industry experts recommend periodic testing of sealed surfaces. Apply a few drops of water on the surface. If it soaks in, a coat of TileLab® or Aqua Mix® sealer will be necessary to keep sealer at peak performance.

Expected Wear

Lasts up to 20 years under normal conditions depending on hardness and texture of surface. Use factors, cleaning routines, harsh cleaning methods, sun exposure and weather conditions will affect wear.

Ordering Information


1 quart (946 ml) bottle

Warranty Information

Product Warranty

Obtain the applicable LIMITED PRODUCT WARRANTY at or send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA. Manufactured under the authority of Custom Building Products, Inc. © 2021 Quikrete International, Inc.

Coverage Chart

Size Min Coverage Max Coverage
Quart (946ml) 200 sq. ft. (18.6 M²) 300 sq. ft. (27.9 M²)

© 2021 Custom Building Products. All Rights Reserved. Privacy