Surface Preparation

Peel & Stick Primer is used for the application of peel and stick mat underlayments like Crack Buster® Pro and EasyMat®.

A versatile mat underlayment for setting tile and stone over any acceptable subfloor. EasyMat® is so fast and easy to install because it is up to 25 times lighter than 1/4″ (6 mm) backerboard, cuts easily with a utility knife, and doesn’t require any nails or screws. The mat was specially designed so that the […]

A self-bonding, fabric reinforced, asphaltic membrane that isolates ceramic and natural stone tile from cracks in the substrate. Crack Buster® Pro is ANSI A118.12 compliant as a crack isolation membrane and reduces sound transmission through the tile assembly.

Both a waterproof and vaporproof uncoupling membrane that can be used for crack-isolation in most tile, porcelain, or natural stone installations. It can also be applied over challenging substrates such as installation over green (young) concrete and single ply 19.2″ (49 cm) o.c. wood framed floors. When exposed to excessive substrate movement, it absorbs stress […]

RedGard® Seam Tape is a fast and easy way to cover seams and changes of plane when installing RedGard® Uncoupling Mat and Fabric Membrane to provide waterproofing and vapor barrier protection.

NOTE: This product is currently unavailable. RedGard SpeedCoat® is a ready-to-use, fast curing liquid-applied waterproofing membrane for both commercial and residential ceramic and natural stone tile installations. Suited for interior substrates, it creates a continuous waterproofing barrier with outstanding adhesion. It bonds directly to clean metal, PVC, stainless steel, and ABS drain assemblies. Its cross […]

An alkali ­resistant fiberglass tape used to reinforce RedGard® Liquid Waterproofing and Crack Prevention Membrane and RedGard® SpeedCoat™ Waterproofing Membrane around drains in shower pans, corners and wherever there is a change of plane in the installation for additional reinforcement.

A fast-setting, polymer-modified, cement-based compound that provides a smooth finish to interior and exterior subfloors prior to the installation of a floor covering. Mix with Patching & Leveling Latex Additive to form an ultra high-strength system over a variety of floor coverings or as an embossed vinyl floor leveler.

A lightweight Portland cement-based, pre-blended mortar for use as a bedding or brown coat for interior and exterior applications.

Use in place of water to increase the bond strength and adhesion when mixing appropriate CUSTOM® patching compounds. It forms an ultra-high strength system over ceramic tile, stone, terrazzo, vinyl sheet goods, VCT, or cutback adhesive residue.