Setting

VersaBond® HP is a commercial-grade, high-performance, polymer-modified mortar designed for large and heavy tile applications. It offers superior bond strength for up to ¾” thick installations. Its non-slump, non-sag formula secures tiles on contact, providing a reliable solution for both horizontal and vertical applications, including floors, walls, pools, and water features. The smooth, creamy texture […]

CustomBlend LHT Large and Heavy Tile Mortar offers a non-sag and non-slump solution for most interior and exterior, wall and floor applications. This polymer modified mortar can be applied ¾” (19mm) thick on horizontal surfaces and can be used for large format porcelain, ceramic and natural stone tile. CustomBlend LHT meets ANSI A118.4HT and A118.11.

Versabond®-LHT RS professional grade adhesive mortar is a rapid setting, non-sag, nonslump, polymer modified mortar for use with large format porcelain, ceramic and natural stone tile. With a non-slumping formula to eliminate lippage, Versabond®-LHT RS can be applied to ¾” (19mm) thick on horizontal surfaces. Suitable for floors and walls, Versabond®-LHT RS exceeds ANSI A118.4FHT […]

VersaBond® Lite offers all the performance of Versabond®-LHT with maximized creaminess and the benefits of a true lightweight mortar. This high bond strength formula is 30% lighter than a traditional mortar, resulting in a product that is easier to trowel and move around the jobsite. Designed for a wide variety of interior and exterior floor […]

Economical polymer modified mortar for use over concrete, cement backerboard and existing ceramic tile. For interior floors and walls.

High bond strength repair formula that is easy to use, develops high early strength and cures fast. Grout in 2 hours. Traffic in 4 hours. Replace broken tile underwater. No need to drain fountains, pools or spas in order to make repairs.

Three-component, 100% solids epoxy mortar system for installation where chemical resistance, impact resistance and high-strength are a necessity. Non-sag and non-slump for large format tiles on floors and walls. Formulated to be 30% lighter than other epoxy mortars.Handles like a cement-based mortar with the performance of an epoxy. Formulated with recycled material, contributing to LEED® […]

Ceramic tile adhesive suitable for most wall, floor and countertop installations. Offers superior adhesion and easy clean-up. Recommended for tile up to 8″ (20 cm) on any side, but can be used up to 15″ (38.1 cm) with significantly longer dry times. Meets ANSI A136.1 Type I

Formulated to provide a consistent bright white back drop for clear, iridescent and translucent glass tile. Non-sag properties support vertical installations.

Pure coat for setting tiles using the mortar bed method. Water-retentive formula eliminates the need to soak tiles. Ideal for setting fixtures and decorative items.