Products : Aqua Mix® : Problem Solvers : Aqua Mix® Grout Release

Aqua Mix® Grout Release

A temporary, water soluble, pre-grout coating. It provides protection against grout and mortar staining and eases grout cleanup.

  WHERE TO BUY Not all products are sold at all stores. Please call the distributor to ensure product availability.
Have a question?

Features/Benefits

Key Features

  • Temporary, water-soluble pre-grout coating
  • Provides protection against grout & mortar staining
  • Installation aid simplifies cleanup

Technical/Installation

Environmental Consideration

Complies with all Federal EPA and SCAQMD standards for VOC

Health Precautions

MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. Contains diethanolamine. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting, seek medical attention. KEEP OUT OF REACH OF CHILDREN

Limitations to the Product

  • Prevent buildup of Grout Release in grout joints
  • Do not use acid solutions for cleanup as acid may react with Grout Release, forming a crystalline residue on surface
  • Product may discolor some light colored tile and stone

Application of Product

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.

Read entire label before using. Apply a coat of Grout Release, ensuring 100% surface coverage using a sponge applicator, heavy-textured paint roller or brush. Allow a minimum of 30 minutes drying time before grouting. Follow grout manufacturer's instructions for grouting process. Grout Release residue should be removed through normal grout cleanup process. If Grout Release residue remains on surface, use Aqua Mix® Heavy-Duty Tile & Grout Cleaner to remove. For most smooth porous surfaces, an application of sealer may be used in lieu of Grout Release prior to grouting.

Cleaning of equipment

Clean tools with water before material dries.

Handling & Storage

  • Close container tightly after each use
  • Store in original container only
  • Store in and use in temperatures between 45° F to 85° F (7.2° C to 29.4° C)
  • Store in areas inaccessible to small children
  • Do not reuse empty container, wrap and discard in trash or recycle

Product Maintenance

Properly applied product requires no special maintenance.

Warranty Information

Product Warranty

Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. Custom's® sole liability under this warranty shall be limited to the replacement of the product. Some states, countries or territories do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty will not extend to any product which has been modified in any way or which has not been used in accordance with Custom's® printed instructions. Custom® makes no other warranties either expressed or implied. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or from one country/territory to another.  This warranty is not transferrable.

Coverage Chart

SIZE Min Coverage Max Coverage
1 Gallon (3.78 L) 300 ft² (28 M²) 600 ft² (55 M²)

© 2014 Custom Building Products. All Rights Reserved.