Products : Grout : Grout Colorant : Polyblend® Grout Renew

Polyblend® Grout Renew

Polyblend® Grout Renew is a waterborne acrylic stain and sealer for renewing or changing the color of cement grout joints. Formulated with fade-resistant pigments, Grout Renew seals the grout against stains while it colors. Available in all 40 Polyblend® Plus colors to complement any tile or stone installation.

WHERE TO BUY Not all products are sold at all stores. Please call the distributor to ensure product availability.

Have a question?

CONTACT US
800-272-8786

Features/Benefits

Key Features

Makes grout joints look like new
Stain and fade resistant

Uses

Use to restore or change grout color of cement grout joints
Interior or exterior use

Benefits

Renew or change the color of grout
Seals against stains
Available in all 40 Polyblend Grout colors

Documents

TDS Documents

Technical Data Sheet Polyblend Grout Renew Colors Technical Data Sheet - French Technical Data Sheet - Spanish

SDS Documents

Safety Data Sheet - English Safety Data Sheet - French

Technical/Installation

Composition of Product

Epoxy modified acrylic latex, fine fillers and colored pigments

General Surface Prep

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.

Existing grout joints should be clean and free of all sealers and contaminants which might inhibit bonding and absorption of colorant. Prepare existing joints by cleaning with TileLab® Sulfamic Acid Cleaner or Aqua Mix® Cement Grout Haze Remover according to directions on the container. Grout must be cured and dry prior to application. Test a small inconspicuous area prior to application. Carefully apply to the grout joint and allow to dry 30-60 minutes. Allow to dry 24 hours to see if desired results are obtained.

Health Precautions

Do not take internally. Harmful if swallowed. If ingested, ingest liquids. Do not induce vomiting. Avoid contact with eyes and prolonged contact with skin. In case of eye contact, flush eyes with water for 15 minutes and call a physician immediately. Keep out of reach of children.

Limitations to the Product

Not recommended for use underwater.
Do not use solvent-based cleaners on recolored grout joints. We recommend TileLab® Grout & Tile Cleaner or a Aqua Mix® AquaShield Cleaner & Resealer.
Unglazed tile will require sealing prior to coloring to ensure Grout Renew isn't absorbed into the tile. We recommend TileLab® SurfaceGard® Sealer.
Do not apply when ambient temperature is below 50°F (10°C) or above 80°F (27°C).

Application of Product

Shake well before using. If more than one bottle of the same color is being used, mix all bottles together in a separate container. Apply to dry grout joints. Test in an inconspicuous area before proceeding with full installation. Apply small bead of Grout Renew directly to center of joint. Work back and forth with a soft-bristled toothbrush to assure a thin, even application. Do not allow it to bead or puddle. Carefully apply to the grout joint and allow to dry 30-60 minutes. Work small areas at a time.

Drying Time

Ready for light traffic in 2 to 4 hours, normal traffic in 24 hours. Do not expose to water for 72 hours. Avoid scrubbing joints.

Cleaning of equipment

Clean tools and hands with water before material dries.

Storage

Store and use in temperatures between 50°F - 80°F (10°C - 27°C) to protect from freezing.

Product Maintenance

Clean with a neutral cleaner such as Aquamix AquaKleen or TileLab Grout & Tile Cleaner.

Ordering Information

Packaging

1/2 pt (237 ml) bottle

Warranty Information

Product Warranty

Obtain the applicable LIMITED PRODUCT WARRANTY at www.custombuildingproducts.com/product-warranty or send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA. Manufactured under the authority of Custom Building Products, Inc. © 2017 Quikrete International, Inc.