Quality begins from the ground up.
Preparing your surface is the most critical task of any tile or stone installation. Custom Building Products offers you one source for the needs of virtually any job.
The foundation of precise tile and stone setting.
Whatever the application, CUSTOM® offers the broadest line of tile and stone setting materials in the industry to give the exact performance your job demands.
Tile grout with dependable performance and color.
Look for tile grout with rock-solid durability, consistency and the largest color palette with Custom. Our grouts are easy to work with yet deliver hard, dense joints.
Care & Maintenance
Stains can RUIN Stone & Tile.Protect Yours Now!
Stains on stone, tile or grout happen easily - and can leave permanent stains. Protect your surface against both oil-based and water-based stains with the right sealer.
Professional Solutions for Professional Results
Offering the largest selection of Sealers, Cleaners, Problem Solvers, Grout Colorant and Stone Restoration products, we provide professionals with the right tools and solutions; making us the #1 Contractor Preferred Manufacturer of Sealers and Cleaners.
CustomTech Flooring Prep
CustomTech – the industry’s leading collection of technologically-superior, easy-to-use, professional grade subfloor preparation products designed for all types of floor coverings.
Tools & Accessories
Precision demands the best.
SuperiorBilt® Tools are professionally preferred for tile, stone and floor covering installations.
Products : CustomTech Flooring Prep : CustomTech Flooring Prep : Tech Patch-MP Multipurpose Rapid Setting Skim Coat & Floor Patch
Tech Patch MP is a fast setting, calcium aluminate compound that provides a smooth finish on interior subfloors prior to the installation of a wide variety of floor coverings. Mix with water only to patch, level or skim coat concrete, OSB and plywood up to 1/2" (12 mm) thick per application. Install floor coverings in as little as 30 – 90 minutes.
Suitable as an Underlayment for:
ASTM International (ASTM)
Resilient Floor Covering Institute (RFCI) Recommended Work Practices for Removal of Resilient Floor Coverings
Tile Council of North America (TCNA) TCNA Handbook for Ceramic Tile Installation, TCNA Method EJ171.
American National Standards Institute (ANSI) ANSI A108.01 and A108.02 of the American National Standards for the Installation of Ceramic Tile
Installation must comply with the requirements of all applicable local, state and federal code jurisdictions.
Tech Patch MP is a blend of calcium aluminate cement, inorganic fillers and polymers
Custom® Building Products is committed to environmental responsibility in both products produced and in manufacturing practices. Use of this product may contribute to LEED® certification.
*Special preparation or primers may be required
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.
All surfaces must be structurally sound, clean, dry and free from contaminants that would prevent a good bond. Concrete must be fully cured. Refer to final flooring manufacturer's requirements for maximum moisture vapor transmission limitations. Smooth concrete surfaces, existing glazed tile, terrazzo, or polished stone may need to be roughened or scarified. Refer to Custom TechPrimeTM A Acrylic Primer technical datasheet for use in lieu of mechanical preparation or when applying over Custom TechMVCTM Moisture Vapor and Alkalinity Barrier. For increased performance in demanding applications, concrete surfaces can be mechanically profiled and prepared by shotblasting, sandblasting, scarifying, diamond-grinding or other engineered approved methods (reference ICRI CSP 3 standards for ideal profile height). Any existing flooring must be well bonded and stripped of old finish.
This product contains Portland cement. Avoid eye contact or prolonged contact with skin. Wash thoroughly after handling. If eye contact occurs, flush with water for 15 minutes and consult a physician. Use with adequate ventilation; do not breathe dust and wear a NIOSH approved respirator. If ingested, do not induce vomiting; call a physician immediately.
Contaminants or curing compounds should be mechanically removed before installation. Concrete must be free of efflorescence and not subject to moisture beyond the floor covering manufacturers' limits or hydrostatic pressure. All concrete surfaces must be able to achieve tensile bond strengths in excess of 200 psi (1.4 n/mm²). For more information about concrete curing compounds see CUSTOM Building Products Technical Bulletin # 92 available on the website under Reference Library.
Plywood floors, including those under resilient flooring, must be structurally sound and must meet all industry guidelines. For questions about proper subfloor installation, call Custom® Building Products.
Gypsum-based underlayment must be sealed or primed to avoid issues related to mineral formation; OSB panels require a primer for adhesion. Gypsum substrates must obtain a minimum 2000 psi (13.8 MPa) compressive strength at the recommended cure time. The underlayment must be sufficiently dry and properly cured to the manufacturer's specifications for permanent, non-moisture permeable coverings. Surfaces must be structurally sound and subject to deflection not to exceed the current industry standards. All OSB and gypsum-based underlayment surfaces to receive Tech Patch MP must be primed with properly applied sealer or a primer coat of Custom® Tech Prime A Acrylic Primer, consisting of 1 part primer diluted with 3 parts clean, cool water in first coat; when dry, apply 1:1 dilution for second coat. Drying time depends on site conditions, but is normally less than 1 hour.
Adhesive layers must be removed. Use extreme caution; adhesives may contain asbestos fibers. Do not sand or grind adhesive residue, as harmful dust may result. Never use adhesive removers or solvents, as they soften the adhesive and may cause it to penetrate into the concrete. Adhesive residue must be wet-scraped to the finished surface of the concrete, leaving only the transparent staining from the glue. To determine desirable results, do a test bond area before starting. Refer to the RFCI Pamphlet, "Recommended Work Practices for Removal of Resilient Floor Coverings", for further information.
Mix 4.0-4.25 qt (3.8-4.0- L) clean, cool water to a 25 lb (11.34 kg) bag of Tech Patch MP or for smaller applications mix approximately 1 part liquid to 3 parts powder.
Slowly add powder to liquid while mixing with a high speed drill (650 RPM or more) and mixing paddle to a lump-free consistency. Mix only amounts that can be applied in 5-10 minutes depending on surface porosity and temperatures.
Apply material into all voids up to 1/2" (12 mm) thickness using a broad knife or trowel and finish flush with surface. For skim coating, use a smooth edged trowel to flatten the surface area. Only spot patching should be done on wood surfaces. If an area more than 5 ft. (1.5 M) in diameter is required, use an appropriate CustomTech™ selfleveling underlayment.
Allow to dry for minimum 30 – 90 minutes. Drying time can vary with thickness, temperature and humidity.
Clean with water before material dries.
Properly installed product requires no special maintenance.
25 lb (11.34 kg) Bags
Obtain the applicable LIMITED PRODUCT WARRANTY at www.customtechflooring.com/reference-library/warranties/ or send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA. Manufactured under the authority of Custom Building Products, Inc. © 2017 Quikrete International, Inc
SQUARE FOOT COVERAGE PER 25 LB BAG (SQUARE METER PER 11.34 KG). Coverage will vary depending on the texture of the surface being smoothed.
1/16” (1.6 mm)
55.2 ft² (5.13 M²)
62.4 ft² (5.80 M²)
1/8" (3 mm)
27.65 ft² (2.57 M²)
31.39 ft² (2.92 M²)
1/4" (6 mm)
13.82 ft² (1.28 M²)
15.70 ft² (1.46 M²)
1/2" (12 mm)
6.91 ft² (0.64 M²)
7.85 ft² (0.73 M²)
CUSTOM BUILDING PRODUCTS
Mailing Address Custom Building Products 7711 Center Ave. Ste 500 Huntington Beach, CA 92647
© 2019 Custom Building Products. All Rights