Quality begins from the ground up.
Preparing your surface is the most critical task of any tile or stone installation. Custom Building Products offers you one source for the needs of virtually any job.
The foundation of precise tile and stone setting.
Whatever the application, CUSTOM® offers the broadest line of tile and stone setting materials in the industry to give the exact performance your job demands.
Tile grout with dependable performance and color.
Look for tile grout with rock-solid durability, consistency and the largest color palette with Custom. Our grouts are easy to work with yet deliver hard, dense joints.
Care & Maintenance
Stains can RUIN Stone & Tile.Protect Yours Now!
Stains on stone, tile or grout happen easily - and can leave permanent stains. Protect your surface against both oil-based and water-based stains with the right sealer.
Professional Solutions for Professional Results
Offering the largest selection of Sealers, Cleaners, Problem Solvers, Grout Colorant and Stone Restoration products, we provide professionals with the right tools and solutions; making us the #1 Contractor Preferred Manufacturer of Sealers and Cleaners.
CustomTech Flooring Prep
CustomTech – the industry’s leading collection of technologically-superior, easy-to-use, professional grade subfloor preparation products designed for all types of floor coverings.
Tools & Accessories
Precision demands the best.
SuperiorBilt® Tools are professionally preferred for tile, stone and floor covering installations.
Products : Care & Maintenance : Travertine Repair Kit : Travertine Repair Kit
Travertine Repair Kit is used to repair cracks and holes up to 1/4" (6mm) deep and 1" (25mm) wide. It is designed to repair isolated, damaged areas. By mixing the light and dark fillers, a broad range of colors can be blended to match most colors of travertine.
Honed, Tumbled and Polished Travertine.
Clean surface of contaminants using water and a microfiber or lint-free towel. Be sure all loose material and dust is removed from the stone.
Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Avoid contact with eyes or prolonged contact with skin. Do not take internally. If eye or skin contact, flush thoroughly with water. If irritation persists, seek medical attention. If ingested, do not induce vomiting. Seek medical attention.
Filler provides a textured, non-polished finish. Not for repairing hairline cracks. Not for re-bonding a broken tile. Not for filling entire tile surface.
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.
In the provided plastic bag, mix together the light filler and dark filler until desired color is achieved. If the color desired matches either the light or the dark, there is no need to mix. Apply the product to the surface using a putty knife, ensuring to pack the repair area with filler. Using the putty knife, scrape the excess material around the repair off the surface. With a damp sponge, in a circular motion gently remove the film off the surface. Do not press firmly or filler will be removed from the repair. Allow the product to fully cure for 24 hours before allowing traffic.
Clean with soap and water before material dries. Cured material is difficult to clean from surfaces.
Keep from freezing. Make sure lid is secured tightly with no exposure to air.
Clean with a neutral cleaner such as TileLab Grout & Tile Cleaner.
Obtain the applicable LIMITED PRODUCT WARRANTY at www.custombuildingproducts.com/product-warranty or send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA. Manufactured under the authority of Custom Building Products, Inc. © 2017 Quikrete International, Inc.
CUSTOM BUILDING PRODUCTS
Mailing Address Custom Building Products 7711 Center Ave. Ste 500 Huntington Beach, CA 92647
© 2020 Custom Building Products. All Rights Reserved. Privacy