Products : Aqua Mix® : Problem Solvers : Aqua Mix® Grout Haze Clean-Up

Aqua Mix® Grout Haze Clean-Up

A safe and effective concentrated cleaner that is added to the grout cleanup water for removal of cementitious grout haze and latex additive film from tile during the grout cleanup process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.

  WHERE TO BUY Not all products are sold at all stores. Please call the distributor to ensure product availability.
Have a question?

Features/Benefits

Key Features

  • Add to clean-up water
  • Removes grout haze and latex additive film
  • Non-acidic formula

Uses

Unpolished natural stone (such as granite, limestone, marble, slate, and travertine), polished granite, ceramic, porcelain, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone and tile surfaces

Technical/Installation

Environmental Consideration

Complies with all Federal EPA and SCAQMD standards for VOC.

Health Precautions

MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. Contains EDTA acid, sodium tripolyphosphate, trisodium citrate dihydrate, and Beta-Alanine, N -(2-carboxyethyl)-N-(2-ethylhexyl)-monosodium salt. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting, seek medical attention.

Limitations to the Product

  • Do not allow product to come in contact with any non-recommended surface
  • Do not use on polished marble or any other acid-sensitive tile or stone
  • Do not use excessive amounts of water during cleanup process as grout pigment may be washed out

Application of Product

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.

DURING GROUT CLEANUP: Read entire label before using. Perform grout cleanup per grout manufacturer's instructions. Mix 3 to 5 oz (90 to 147 mL) of Grout Haze Clean-Up per gallon (3.8 L) of water. Wet a grout sponge or terry cloth towel with the cleaning solution, wring out excess liquid. Wipe diagonally across the tile. Repeat steps 4 and 5 every 10 to 15 ft (.9 M to 1.3 M) or as necessary. Remove residual cleaning solution using a clean grout sponge or terry cloth towel dampened with clean water only.

AFTER GROUT CLEANUP WITHIN 10 DAYS OF GROUTING: Use full strength if grout haze was not completely removed during grout cleanup. Apply directly to surface and agitate with white nylon scrub pad or brush. Allow product to dwell for 5 to 10 minutes for stubborn areas or heavier grout residue. Rinse with clean water to remove residual cleaning solution.

Cleaning of equipment

Clean tools with water before material dries.

Handling & Storage

  • Close container tightly after each use
  • Store in original container only
  • Store in and use in temperatures between 45° F to 85° F (7.2° C to 29.4° C)
  • Store in areas inaccessible to small children
  • Do not reuse empty container, wrap and discard in trash or recycle

Product Maintenance

Properly applied product requires no special maintenance.

Warranty Information

Product Warranty

Obtain the applicable LIMITED PRODUCT WARRANTY at www.custombuildingproducts.com/product-warranty or send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA. Manufactured under the authority of Custom Building Products, Inc. © 2017 Quikrete International, Inc.

Product Videos

 | 

Coverage Chart

SIZE Min Coverage Max Coverage
1 Gallon (3.78 L) 2,400 ft² (223 M²) 4,800 ft² (446 M²)

© 2018 Custom Building Products. All Rights Reserved.