Back
Main Image

 

 

Sealer’s Choice Gold is a premium, no-sheen, natural look, water-based, penetrating sealer formulated to provide maximum stain protection. This formula is so strong that it is even great for commercial food preparation and serving areas.

Key Features:

  • Premium, professional quality
  • Rapid Cure Formula protects in less than 4 hours
  • Maximum stain resistance
  • Interior or exterior use
  • Water-based
  • Allows water vapor transmission  
  • Contains Microban® antimicrobial protection that inhibits the growth of mold and mildew on dried grout

Use Sealer’s Choice Gold with all natural stone surfaces, unglazed tile, porcelain, clay pavers, concrete, brick, masonry and grout. It may also be used as a pre-grouting sealer to protect textured or porous tile from staining or “picture framing” during grouting. Sealing the tile before grouting will make grout removal much easier when installing porous tile. Apply Sealer’s Choice Gold according to directions after the tile has been bonded for a minimum of 24 hours, or apply the sealer to the front face of tile before installation.  After application, wait a minimum of two hours before grouting.

For convenience, Sealer’s Choice Gold is available in pint, quart, gallon and five-gallon and 55-gallon sizes.

Technical Bulletin on Moisture Content for Sealer Application

Case Study: Texas Carved Stone

© 2019 Custom Building Products. All Rights Reserved.