Products : Aqua Mix® : Sealers : Aqua Mix® Sealer Application Kit

Aqua Mix® Sealer Application Kit

Specially designed for stone and tile sealer application and cleanup. The kit contains one 4" x 4" sponge application pad for easy sealer application with less waste and two 18" x 18" microfiber towels for quick cleanup after sealing. Application pad distributes sealer evenly and efficiently for better, more even application. Microfiber towels lift, trap, and absorb better than other fibers and trap residue, dirt and particles that other towels may leave behind. Will not scratch stone surfaces and is reusable, absorbent and long-lasting.

  WHERE TO BUY Not all products are sold at all stores. Please call the distributor to ensure product availability.
Have a question?

Features/Benefits

Key Features

Designed for stone and tile sealer application and cleanup

Documents

TDS Documents

Technical Data Sheet

Technical/Installation

Suitable Tile Types

  • All natural stone and tile surfaces
  • Also excellent for everyday cleaning and polishing with Aqua Mix® cleaning products

General Surface Prep

Surface should be dry, clean and free of waxes, sealers or finishes. TileLab® Heavy-Duty Stripper & Cleaner or Aqua Mix® Heavy-Duty Tile & Grout Cleaner will clean the surface or strip wax and acrylic finishes. New installations need to be cured 48 – 72 hours before application. Protect painted surfaces. Test product in obscure area to ensure desirable results. Sealer can be applied 48 hours after grout has been installed.

Pre-Grout Sealer/Grout Release

Porous tile, such as clay and Saltillo pavers, can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier. Apply two coats of sealer according to directions after tile has been bonded for a minimum of 24 hours, or apply to front face of tile before installation.

Application of Product

Follow surface preparation and usage instructions of sealer to be used. Apply sealer to applicator pad and spread evenly over application area. Per sealer instructions, clean up any leftover sealer residue with microfiber towels. Wash applicator pad and towels per washing instructions.

Drying Time

  • Allow 30 minutes drying time between coats.
  • Ready for surface traffic in 2 hours.
  • Keep dry for 12 hours.
  • Achieves a full cure in 24 hours.

Handling & Storage

Wash and allow to dry per instructions and store in resealable pouch provided.

Product Maintenance

Do not use cleaners containing ammonia, acids or bleach. Use an appropriate TileLab® or Aqua Mix® neutral cleaner. Tile industry experts recommend periodic testing of sealed surfaces. Apply a few drops of water on the surface. If it soaks in, an additional application of sealer will be necessary to keep sealer at peak performance.

Warranty Information

Product Warranty

Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. CUSTOM's sole liability under this warranty shall be limited to the replacement of the product. Some states, countries or territories do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty will not extend to any product which has been modified in any way or which has not been used in accordance with CUSTOM's printed instructions. CUSTOM makes no other warranties either expressed or implied. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or from one country/territory to another.  This warranty is not transferrable.

Product Videos

 | 

© 2016 Custom Building Products. All Rights Reserved.